WestminsterLab Rei Operational Manual page 18

12
Opinions to obtain best performance
I. Place on a rigid, stable, heavy mass surface.
II. Use one Rei amplifier for each speaker unit/order. Each amplifier
handles less loading and results in a better performance in dynamics,
handling and power.
III. Warm up for more than 45 to 60 minutes.
IV. Put the amplifier as close as possible to the speaker and keep the
speaker cable as short as possible. It is preferable to use a long bal-
anced interconnect cables to the amplifier and keep the speaker cable
length minimized. Speaker cables add impedance to the loading in
which power will be wasted in the cable, decreasing the overall perfor-
mance.
V. It is recommended to use a dedicated AC power cord rated at a mini-
mum of 13 amps for 230V mains, or 20 amps for 1 10V mains. We highly
recommend WestminsterLab power cables to obtain the best expe-
rience and performance. Power conditioner and also regenerator are
also not recommanded for Rei.
-18-