Recording Modes; Continuous Recording; Motion Activated Record; Pir Motion Video Recording - Zetronix zAtom-PRO User Manual

Recording Modes

The Atom has 3 modes or operation; Motion Activated, Continuous
Recording and PIR Motion Recording. Before changing its
recording mode, please ensure the camera is on standby (solid
green light r) where video is not currently being recorded. To
pause any recording, press the video record

Continuous Recording

Press the video record button
will flash 3 times and go out indicating recording has started. Pause
the recording by pressing the video record button

Motion Activated Record

Press the motion detect button
mode. Anytime theres a change in the video image video will start
recording. The indicator light will flash 3 times and go out. Hitting
the motion detect button
the camera device back into stand by mode indicated by a solid
green light r. When recording is triggerd by motion, the camera
will record for one minute before it stops.

PIR Motion Video Recording

Hit the PIT motion detect button
mode. Video will recording anytime theres motion in front of the
PIR sensor o. The light will blink 3 times and go out. Hitting the PIR
motion detect button
camera back into stand by mode indicated by a solid green light r.
When recording is triggerd by motion, the camera will record for at
least a minute before it stops going back to standby.

Taking Photos

Ensure the camera is on standby with a solid green light r, then
press the photo button
once idicating the picture was saved.
OPERATION
to start recoding. The green light
1$
to go into motion activated
1#
again will stop the recording putting
1#
to go into PIR motion activated
1%
again will stop the recording putting the
1%
to snap a picture. The light
1@
button at any time.
1$
again.
1$
will flash
r