Table of Contents
Advertisement
To see this exact time interval without zooming and panning:
@ R
1.
Press
2.
Change the XRNG values to [0.85, 0.95] (Figure 4- 1 7).
R
3.
Press the
Figure 4- 1 7 Plot Setup Menu
The StreamSmart Aplet will match the minimum and maximum time values in the
XRNG fields to the closest corresponding time values in the data set. They may
not always match exactly. In Figure 4- 1 8, the maximum x-value is indeed 0.95 and
the width of the display represents 0.1 second. The next streaming experiment will
maintain the width of the display at 0.1 seconds, meaning that XRNG will initially
be [0, 0.1]. These values will remain in effect until new values are chosen or the
StreamSmart Aplet is reset.
Plot display options
When performing experiments with multiple sensors, the StreamSmart Aplet places
each data stream in its own swim-lane by default. The data streams appear in the
numerical order of their channels, from top to bottom of the display. Under certain
circumstances, you may want to see multiple data streams superimposed instead
of separated in swim-lanes. In the Plot Setup menu, the Plot Display field allows
you to choose either option. This field has two settings: Stack and Overlay.
Figure 4- 1 9 depicts the data streams from two microphones shown with the default
Stack option, with the data streams separated in their familiar swim-lanes. Press
!CHOOS and select the Overlay option to see the streams superimposed, as in
Figure 4-21.
Figure 4- 1 9 Stacked
to enter the Plot Setup menu.
key to return to the streaming window.(Figure 4- 1 8).
Figure 4-20 Select Overlay
Advanced Topics
Figure 4- 1 8 Return to Streaming Window
Figure 4-21 Overlaid
31
Advertisement
Table of Contents
