Table of Contents
Advertisement
4
Advanced Topics
This chapter is devoted to a number of advanced topics, including:
•
Sensor setup
•
Unit setup
•
Calibration
•
The Plot Setup menu
•
Oscilloscope mode
•
StreamSmart on the virtual HP calculators
•
Keyboard shortcuts
•
Mathematical detail behind the zoom and pan features
These advanced topics will help you get the most out of the HP MCL.
Sensor setup: manually identify a sensor
The StreamSmart Aplet is designed to automatically identify a Fourier
attached to the StreamSmart 410. In some cases, StreamSmart may fail to identify
a sensor or identify it incorrectly. In this case, you must manually identify the sensor
using the Sensor Setup dialog box. Press
option.
Figure 4- 1 Sensor Setup
Figure 4-2 shows the Sensor Setup dialog box with accelerometers plugged into
Channels 1 and 2. Suppose that the sensor in Channel 1 is not an accelerometer,
but a force sensor. With Channel 1, highlighted, press !CHOOS and select the
appropriate force sensor option. In Figure 4-3, the 0-80 N Force sensor option
has been selected. Press
Setup dialog box. Figure 4-4 shows the Sensor Setup dialog box with the new
changes. Press
Figure 4-5 shows the Numeric view with the new force sensor in Channel 1.
to make this change effective and return to the Sensor
$OK#
to finalize any changes and return to the StreamSmart Aplet.
$OK#
V
and select the Sensor Setup
Figure 4-2 Sensor Setup Dialogue Box
Advanced Topics
®
sensor
27
Advertisement
Table of Contents
