Prodigy AutoCode Owner's Manual page 68

AutoCode Blood Glucose Meter
®
If "HI" appears on your meter screen, this
could be a result of severe hyperglycemia
(results higher than 600 mg/dL). Retest
your blood glucose. If "HI" appears again,
contact your healthcare professional
Figure 40
immediately. See Figure 40.
Repeated Unexpected Test Results
If you continue to get unexpected test results, check
your blood glucose monitoring system by performing
a control solution test. Refer to "Performing a Control
Solution Test" section in this manual.
Unusual Red Blood Cell Count
A hematocrit range (percentage of red blood cells in the
blood) that is extremely high (above 60%) or low (below
20%) can also cause false readings.
Owner's Manual
68