Table of Contents
Advertisement
5.2 Air connection systems
Ducted mode
Connect the fume expulsion duct (inside
diameter 6" Ø (150 mm Ø) to the exhaust
of the motor inlet.
NOTE:
The expulsion duct must not have a
diameter of less than 5"Ø (120
mm Ø).
Recirculation mode
Leave the motor intake free. Install the
optional active carbon filters.
WARNING
• The hood is not supplied with an active
carbon filter, it is necessary to buy it
separately and assemble it before using
the hood.
Installation
Chimney assembly
1. Place the upper part of the plate at the
maximum height that the chimney should
reach.
NOTE:
Take care to align the center of the
plate with the center of the
appliance.
2. Attach the plate with the provided plugs
according to the type of wall.
15
Advertisement
Table of Contents
