Table of Contents
Advertisement
INSTALLATION
This unit is designed for home-use and car-use. When installed on the car, please
follow the installation instruction below.
SCREW
M4x5
3
2
1
Note:
1. First remove the two screws that lock the DVD mechanism, then attach the brackets
on both sides of unit with screws (M4x5), last install the unit with screws (M5x25).
2. When fix the unit, you can slide the screw (M5x25) to left side or right side to meet
your needed position. In the figure above, select two holes among positions that
marked 1, 2, 3 and 4 to fix the bracket.
SCREW
M5x25
SCREWS LOCK THE DVD MECHANISM
7
SCREW
M4x5
4
3
2
1
Advertisement
Table of Contents
