Table of Contents
Advertisement
GENERAL OPERATION
TURN THE UNIT ON
After all connections are completed
correctly, press the
front panel or
(POWER) on the remote
control to turn on the power. When the
unit is on, it will search the disc
automatically. If there is a disc in the disc
slot, the unit will start playback
automatically. Besides this, you should
turn on the monitor thats connected to
the player.
Standby State
1) When the unit is on, press
on the front panel or
the remote control to turn the unit off
temporarily, in order to stop the
playback in a short time and the unit
goes into standby state.
2) In standby state, press
the front panel or
remote control again to recall
playback. For disc playback, it can
realize memory play function.
Note: The unit has screen saver function
(select "ON" in Screen Saver setup). If
the playback is stopped and there is no
function operation in 5 minutes, it will
activate the screen saver function
automatically; when any function for DVD
player is activated, the screen saver
function will release automatically.
Remote Sensor (IR)
Point the remote handset to the remote
sensor IR on the front panel. Receive
the signal from remote handset.
Loading a Disc
1. Insert the disc with printed side facing
up into the disc slot.
2. The player will start playback
automatically.
Ejecting a Disc
Press
(EJECT) button on the front panel
or on the remote control to eject the disc.
(POWER) on the
(POWER)
(POWER) on
(POWER) on
(POWER) on the
Disc Slot
EJECT Button
BASIC PLAY
Stopping Playback
- Briefly press
stop the unit playback, when
button on the front panel or
button on the remote control is
pressed, normal playback will
continue.
- Press
(Stop) button twice to stop the
playback and go back to DVD LOGO.
Pausing Play/Step Play
Pressing on the remote control for the
first time or presing
during playback will stop playback
temporarily. To return to normal
playback, press
or
on the front panel.
If you play a DVD/VCD/SVCD, press on
the remote control again to stop at the
next picture (step function). If you play a
CD/MP3/Picture CD, pressing
remote control again is ineffective.
Fast Forward/Fast Reverse
Press
&
time the button is pressed, the speed of
fast forward/reverse changes according
to the disc as follow.
DVD:
Normal Playback
VCD/CD/MP3:
Normal Playback
Slow Motion Playback (For DVD Only)
Press
/
during play.
Each time the button is pressed, the
speed of slow forward/reverse changes
according to the disc as follow.
DVD:
X1/32
X1/16
In slow motion state, press
remote control to recover normal playback.
Skipping Track
Press
/
control or
during playback.
Press
to skip to the next track, and
press
to skip to the previous track.
Note: For some VCD2.0 discs (PBC-
playback control),
be unavailable.
12
(Stop) button to pre-
on the front panel
on the remote control
during playback. Each
X2
X4
X16
X2
X4
X1/8
x1/4
on the
buttons on the remote
/
on the front panel
/
buttons may
(Play)
on the
X100
X8
x1/2
Advertisement
Table of Contents
