Others Setup; Tv Operation - Boss Audio Systems DVD-2900T User Manual

SETUP

OTHERS SETUP

• When you enter into the OTHERS setup
page, you will see the following picture.
You can change the setting for Load
Default and Screen Saver.
OTHER
Load Defaultl
Screen Saver
• "Load Default" is used to revert to
factory initial settings.
• "Screen Saver" is used to switch on/off
the screen saver function.
Select
On
Move Select

TV OPERATION

Press the MODE button on the remote
control to switch among TV mode.
When in TV mode, the function of the
buttons served in DVD mode is locked.
Searching Channels
Pressing MENU (TV SEARCH) button on
the front panel of the DVD unit for more
than 2 seconds or press MENU on the
remote control will enter into searching
mode. Then press
control or button on the front panel to
start searching TV channels and press
on the remote control or
on the front panel to stop searching.
Selecting Channels
- Press (CH+) button to choose
channel upward, press
button to choose channel downward.
- The numeric buttons (0, 1~9) allow
you to select the corresponding
channel directly.
- Press digital select button 3D (-/--)
cooperatively used with numeric
buttons to select channel desired.
Volume Adjustment
Press VOLUME +/- button on the remote
control to adjust volume level.
Mute
Press MUTE button to mute the sound.
Press MUTE button again to press
volume up/down buttons on the front
panel or on the remote control, sound
will resume.
22
on the remote
button
(CH-)