Lock Setup - Boss Audio Systems DVD-2900T User Manual

SETUP

LOCK SETUP

• When you open the LOCK setup page,
you will see the following picture:
LOCK
Rating
Password
Country Code
• "Rating" is used to set the parent control
level.
LOCK
Rating
Password
Country Code
• When you enter into this item, the
system will require you to input the
password, if the password is correct,
you can be permitted to change the
parent lock level.
Then you must input the password
"3351".
• If you find it wrong in the course of
entering the password, press CLEAR
button to clear the entered characters.
• When you enter the correct password,
you can use
the parent level. Here provide 9 kinds
of level including 1~8 and unlock.
• Regarding to the levels, please refer
to the "PARENT CONTROL".
• When you complete the set in the setup,
you must eject/load the disc form the
disc slot, and then the function will
come into effect.
• "Password" setup is used to set the
new password or change the old
Unlock
New
US
Move Select
Unlock
8 (Adult)
7
6
5
4
3
2
1 (Kids)
Prev. Move Select
/ buttons to change
password; before you enter into this
item, the system will require you to input
the old password, if the password is
correct, you can be permitted to change
the password.
• "Country Code" is used to set the
country code. The code information
standing for original producing area
country will be written in every DVD
disc when it is produced. There are two
characters standing for the name of the
country. For example, CN for China, CA
for Canada, and so on. Only when the
country code you set in the SETUP
menu matches with the disc's own
country code, the parent level that you
set will come into effect.
The detail operation is:
• When you first set this item, it will
display "NEW" and require you to
input a new password, then input the
password again to confirm it.
• Then the first character of the country
code will be selected, you can use
/ buttons to select upward or
downward to confirm the first
character;
• When you confirm the first character,
the second character will change into
all the characters that may match
with the first character to stand for
the corresponding country code;
• Then use
second character;
• Press ENTER button to confirm the
setting for country code.
Note:
If you have set a password in "Rating"
and "Password", when you set the
country code, it will require you to input
the password. Only when the password
is correct, you can be permitted to
change the country code. If you select
"Load Default" in SETUP menu, the
password you have set will be cleared.
21
/ buttons to select the