Mounting Brackets - Danby DDW18D1EW Installation Manual

Hide thumbs Also See for DDW18D1EW:
Table of Contents

Advertisement

Available languages

Available languages

INSTALLATION INSTRUCTIONS

MOUNTING BRACKETS

The mounting brackets should be used when the dishwasher is installed in cabinetry. Use of parts other
than the supplied brackets may results in damage to property or bodily injury.
The power supply receptacle for the appliance should be installed in a cabinet or on a wall adjacent to the
under counter space where the appliance will be installed.
There should be an opening through the partition between the compartments that is large enough for the
plug to pass through. The opening should not be more than 1.5" (3.8 cm) large.
The the cabinetry is made of wood, ensure the sides of the hole are smooth and rounded. Is the cabinetry
is made of metal, cover the edges of the hole with an edge protector provided for this purpose by the
manufacturer. This is to ensure there is no damage to the power cord when passing through the partition.
Wood Counter Top Board
If the counter top board is made of wood, place
the two mounting brackets into the top corners of
the dishwasher as shown and bend the sides of the
brackets if necessary.
Other Types of Counter Top Board
If the counter top board is made of ceramic or other
material, place the two mounting brackets into the
top corners of the dishwasher as shown and bend
the sides of the brackets if necessary.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ddw18d1ebDdw18d1ess

Table of Contents