Advertisement
The fact that the [But] button was pressed and
you can enter a new code will report the signal
[
G]
3
(par.2.2).
Checking the new Code:
[ON][new PIN][Enter]
The first closing with a new Code must be
carried out with the safe door open.
5
Servicing
First time open the lock with the key. Next,
insert the battery into the lock in accordance
with par. 5.1
The battery supplied with the lock is designed
for the initial check of operability. Before using
the lock, it is recommended to change battery
on new one.
5.1
Changing the Battery
The battery is located on the inner side of the
door.
Open the cover of the battery box (Fig.5.1).
Fig. 5.1
Change battery on new one (9V, Alkaline, type
6LF22, 6LR61, 6LP3146).
Take the cover back to its location.
Digital Safe Lock
PLS-3.2
5.2
Opening the lock when the Battery is Flat
Take out the cover for emergency opening (5)
(Fig.5.2).
Fig. 5.2
Fig. 5.3
Insert the key against the stop (key's flag on the
right) and turn it anti-clockwise until it stops (Fig.
5.3).
Open the door and change the discharged
battery, see par. 5.1.
5.3
Opening the lock when the Battery is
Discharged
Take a new battery (9V, Alkaline, type 6LF22,
6LR61, 6LP3146).
Press the new battery to emergency power pins
(6) and fix it in this position (see Image 5.4)
Fig. 5.4
Enter the valid code on the keypad (1).
Disconnect the emergency battery, open the
door and change the discharged battery, see
par. 5.1.
www.safe.ru
USER MANUAL
Ver.1/1 30.08.2019
Advertisement
