Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Dell Inspiron 7415 2-in-1 Service Manual

7. Install the base cover.
8. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
4. Remove the coin-cell
5. Remove the memory modules.
6. Remove the wireless card.
7. Remove the M.2 2230 solid-state drive
8. Remove the I/O board.
9. Remove the speakers.
10. Remove the heat sink.
11. Remove the fan.
12. Remove the touchpad.
13. Remove the power button
14. Remove the display assembly.
15. Remove the system board.
NOTE: The system board can be removed along with the heat sink.
About this task
The following image indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
58 Removing and installing components
After working inside your
Before working inside your
battery.
or M.2 2280 solid-state
or power button with fingerprint
computer.
computer.
drive, whichever applicable.
reader.