Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sper scientific 300058
Summary of Contents for Sper scientific 300058
- Page 1 Waterproof Digital Refractometer 300058...
- Page 2 Waterproof Digital Refractometer 300058 Copyright ©2015 by Sper Scientific ALL RIGHTS RESERVED Printed in the USA The contents of this manual may not be reproduced or transmitted in any form or by any means electronic, mechanical, or other means that do not yet exist or may...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. INTRODUCTION ....4 2. MATERIALS SUPPLIED....5 3. -
Page 4: Introduction
INTRODUCTION This Sper Scientific Waterproof Digital Refractometer measures concentrations in Brix, 5 additional sugar scales, and Refractive Index with laboratory accuracy. The small, light, meter offers digital precision for field use. A protective IP67 waterproof case and a scratchproof sapphire lens ensure long-lasting durability and reliability. -
Page 5: Materials Supplied
MATERIALS SUPPLIED • Refractometer • One lithium-Ion battery • DC Power Adapter • Distilled Water • Transfer pipet • Instruction Manual • Carrying Case FEATURES • Measures Brix (sucrose), refractive index, dextran, fructose, glucose, lactose, and maltose • Covers the entire 0 ~ 95% Brix range •... -
Page 6: Power Supply
POWER SUPPLY The meter is powered by one rechargeable lithium-ion battery. An icon in the upper-right corner of the LCD indicates the level of battery power available: 75%-100% power 40%-75% power 15%-40% power Less than 15% power. (This icon will flash) The DC adapter included plugs into the port on the left side of the meter. -
Page 7: Front Panel Description
FRONT PANEL DESCRIPTION 1. POWER - Power on/off 2. READ - Read measurements /select scale 3. CAL - Calibrate meter 4. LENS COVER LCD DISPLAY 1. S 1 - Current scale number 2. BATTERY ICON - Battery power level 3. DISPLAY - Displays temperature and readings... -
Page 8: Calibration
CALIBRATION Use distilled water (refractive index 1.3330 ~ 1.3340) to calibrate the meter. 1. With the meter turned off, place a few drops of distilled water on the lens. 2. Close the lid to cover the lens. 3. Press POWER to turn the meter on. 4. -
Page 9: Measurement Proceedures
MEASUREMENT PROCEDURES After calibration you can remove the distilled water from the lens and begin measurement. Note…Use a clean, lint-free cloth or tissue to remove solutions from the lens. 1. With the meter turned off, place a few drops of solution on the lens. -
Page 10: Error Codes
MEASUREMENT ERRORS Certain conditions can cause an error code to appear on the LCD: Error Code & Cause - - - There is no solution on the lens The measurement is above the upper limit The measurement is below the lower limit SPECIFICATIONS Measurement Scale Range... -
Page 12: Warranty
If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does not cover probes, batteries, battery leakage, or damage resulting from accident, tampering, misuse, or abuse of the product.
Need help?
Do you have a question about the 300058 and is the answer not in the manual?
Questions and answers