JMA BT MULTIUSER User Manual page 5

2.3 Sending Open Commands
Once the remote control has been linked that is transmitting provided that you are
and the open button configured on the within Bluetooth range. Once detected, the
buttons are activated and you will be able
can now be used to send commands to the to press them from the app to send the
opening command.
When the remote control receives
the opening command and activates
control is transmitting. To do this, hold
buttons 2 and 3 until the green LED starts
deactivated. Once the remote control
to flash.
door receiver, the Bluetooth signal is
flash, release the buttons. The remote control reactivated and the app can detect it in
will now be transmitting constantly and the order to reactivate the buttons.
app will be able to locate and activate the
corresponding buttons.
remote controls can be active on the
Generally speaking, the app will take between home screen if one button from each has
5 and 10 seconds to detect the remote control been configured.
2.4 Settings Menu
The app has a settings menu with the following options:
1) List of remote controls
This option displays the remote controls linked to the app, allowing their
name and logo to be changed or items to be removed from the list.
2) Consult, add or remove licences
See Section 3 of the LICENCES Manual
3) M-BT remote control reset
If, at any time, you see that the app detects a remote control and the
buttons are active but the remote control or the door does not respond,
4) Edit profile
This can be used to change the user password.
5) Change language
This can be used to select the language in which to use the app
25