JMA BT MULTIUSER User Manual page 3

Any open button from any
linked remote control can
buttons on the screen.
Click "Edit Buttons" to
access a screen showing
all the remote controls
that have been linked to
the account.
If no remote controls have
been linked or you wish
to link a new one, click
the "Link New Remote
Control" button.
20
A new screen will open
instructing you to press
to begin the linking
process. You need to
same time until the green
control starts to flash. If it
does not start to flash, it
may be the case that the
remote control has no free
licences. See LICENCES
under Section 3.
control starts to flash green,
release the buttons and
you have started to link will
appear in the app.
the linking process will
continue. A screen will be
displayed for entering a
name and logo you wish to
associate with the remote
control being linked.
Once these have been
entered, the new remote
control will appear on the
"List of Linked Remote
Controls". The image
below shows 2 linked
remote controls with the
names "mwhite" and
"Lock", as well as the
"Home" logo.
21