Product Setup; Switch Setup - D-Link DGS-1005D Quick Installation Manual

PRODUCT SETUP

SWITCH SET-UP
Internet
Router
LED
DGS-1005D/1008D
Step 1
Connecting the power adapter
Plug the power adapter into a free wall socket, then plug the
other end of the power adapter cable into the power port of the
DGS-1005D/1008D. The power LED will light up, confirming that
the device is powered up successfully.
Step 2
Using the 10/100/1000 Mbps Gigabit Ethernet ports
Use one of the 5 ports on the DGS-1005D or 8 ports on the
1008D to hook up your network devices with a LAN cable.
Step 3
Determine that the Switch is Powered On
This Power LED indicator light is green when the Switch is receiving
power; otherwise, it is off.
Determine that the Network Devices are Connected
The Link/Act LED indicator light is green when the port is connected to a
device.
The green indicator blinks as data is transmitted or received.
3