The Main Menu; General Format Setup - Redpost RPC-80 Manual

THE MAIN MENU

The various parts of the configuration section are grouped under the headings of the
main configuration menu. These menu headings are used as the headings for the
manual sections that follow.

GENERAL FORMAT SETUP

This section covers the general format of the printed text, graphs and display.
S L allows you to choose the language that will be used for all the text
ELECT ANGUAGE
and displays. The language you choose comes into use at once and applies to all
the monitors used with this playback unit. Some of the older 100 Series PU monitors
are programmed with French language text and displays. When these monitors are
used with the RPC-80 they produce text and displays in the language set here by the
S L menu.
ELECT ANGUAGE
S D P
ELECT ECIMAL OINT
(99.9) or the comma (99,9) to separate the integer part from the fractional part of the
number. No separators are offered between the thousands. The chosen format
applies to all printed output, displays and pre-processed data output on the External
Link.
S G F
ET RAPH ORMATS
introduces the idea of user formats.
User formats
The RPC-80 is supplied with all the format details pre-set to standard values and you
do not need to change any item that you are happy with or that does not apply to
your installation. Just press the OK button when you are shown an item and it will
remain as it is. Remember that when you are first shown an item the display will
show the current setting or value of that item.
PU user
F PU U
ORMAT FOR SER
Choose from the following units:-
For temperature channels; ºC or ºF.
For pressure channels; bar, lb/in
The chosen units apply to all printed output, displays and pre-processed data output
on the External Link and apply to all PU monitors used with this playback unit. The
older 100 Series PU monitors were programmed with various units as requested by
customers at the time of purchase. When these monitors are used with the RPC-80
they produce all output in the units set here by the U
Choose the starting point of the temperature and pressure graph scales.
Choose the size of the graph major division steps for the temperature and pressure
graph scales.
6
offers a choice of two number display formats using the dot
leads you into the settings for all the graph variables and
sets up the graph format for use with PU monitors.
2
or kg/cm .
2
menu.
NITS