General Description; Entering Configuration Section - Redpost RPC-80 Manual

Playback unit
Hide thumbs Also See for RPC-80:
Table of Contents

Advertisement

GENERAL DESCRIPTION

Using the configuration section you can tailor the operation of the RPC-80 playback
unit to suit your exact requirements. When you have made your chosen settings you
return to the normal operating mode and the normal simplicity of control.
These instructions for configuration are offered in a separate manual because it is
not necessary for everybody involved with the day to day operation of the RPC-80 to
be familiar with them. This manual assumes that you are reasonably familiar with the
normal operation of the RPC-80 as described in Manual-1.
The RPC-80 is supplied in a "default" configuration with many of the features
described in this manual turned off. It is perfectly possible to continue to use the
playback unit in that form but the extra features, once set up correctly, can extend
the usefulness of the whole monitoring system.
The setting section allows you to control and adjust some features such as the clock
without entering the configuration section. This section is described in Manual-1.

ENTERING CONFIGURATION SECTION

The configuration section is protected by a simple password system that is designed
more to prevent inadvertent operation than to deny access to a determined person.
To enter the configuration section, first enter the setting section in the normal way by
switching on and holding down any button until the opening display of time and date
is over. This is described in more detail in Manual-1.
Choose S
C
and then R
D
T
. Change the year number to the
ET
LOCK
ESET
ATE AND
IME
password number in just the same way that you would set the year. The clock and
calendar will not be disturbed by this but, if you have set the correct password
number, you will move into the configuration section. The password number is 1991.
The first display asks you to please read this manual before continuing and it is
important that you should at least have this manual ready to refer to before starting
to change any settings.
3

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RPC-80 and is the answer not in the manual?

Questions and answers

Table of Contents