Contents Precaution Quick Start Overview.....................2 Compositions..................4 Accessories..................6 Setting Up...................6 Battery Charging................8 Power LED..................9 Battery Replacement................9 Operation Power Button................... 11 Home/Exit Button................12 Magnification................... 12 Brightness..................13 Color Mode..................13 Contrast Control................14 Lighting..................... 15 Volume....................16 Image Freeze.................. 16 Image Storage.................16 Line and Mask.................
Page 3
Location Function................19 Live Panning..................20 Focus Control.................. 21 Toggling System (Depends on the configuration)....21 Full Page Reading (Optional)............26 Text to Speech (Optional)............. 26 Open Application................31 Settings Menu................. 36 HDMI Output..................38 HDMI Input..................39 Hardware Reset................39 Troubleshooting Specification...
Precaution Before using Clover Book for the first time, you must charge its battery. Refer to the Battery Charging section for more details. Always operate the unit in a place where the temperature is between 10°and 35°C (50°and 95°F). Keep the unit away from wet areas, rain, and other sources of liquids.
1-60 times continuous and lossless magnification. The physical buttons operation and touch screen gesture with audio and vibration feedback are both supported so that more convenient interaction can be chosen by your preference. The built-in OCR engine (available only in Clover Book) will auto...
Page 6
recognize the context of various language with user-preferred page size, and speak aloud with natural voice generated by TTS engine, providing reading and auditory enjoyment. The device owns all basic and practical functions, allowing you to read, change color, capture images. Real time navigation, Reading Line &...
Compositions 1. LCD Screen 2. Home/Exit Button 3. Enhanced Color Button 4. Joystick 5. Zoom Button 6. Speech/Enter Button 7. Tray 8. Power Button 9. DC Port 10. HDMI In Port 11. HDMI Out Port 12. USB Port 13. SD card Slot 14.
Page 8
16. Earphone Port 17. Voice Up Button 18. Voice Down Button 19. Focus Control Button 20. Freeze Button 21. Speaker 22. Lifting Handle 23. Battery Slot 24. Unlock Button 25. LED Lights 26. Main Camera 27. Camera Stick 28. Position Knob 29.
Accessories User Manual Power Adapter HDMI Cable (optional) Cleaning Cloth Carrying Case Light Shield Setting Up Device Setting Up Step 1 Place the device on a flat surface, press the tray to make the device stable and pull up the handle at the same time...
Page 10
Step 2 Keep pressing the tray and unfold the arms to a suitable angle. Step 3 Unfold the display panel to a comfortable reading height. Distance Camera Setting up (Optional) With the device setting up already, rotate the camera stick clockwise to the suitable viewing height.
Light Shield Setting up (Optional) Peel off the sticker cover from the light shield and then adhesive the shield to the back side of the device as the picture shows. Battery Charging Connect the supplied power cable to the unit’s charging port, then connect the power adapter into an AC outlet to start charging.
Power LED Charging when the unit is off, the power LED will be green and auto turn off when fully charged. A full Charge will take about 3 hours and will support the unit working for about 4-5 hours. ...
Page 13
which is very convenient to be exchangeable. Step 1 Turn the device upside down and let the back cover of panel face to you as the pictures show. Step 2 Press the Unlock Button on the back side and the battery will be released.
Operation Clover Book has different configurations as touch screen, built-in distance camera and OCR function are optional to satisfy various requirements. According to the model that you purchased, please refer to the corresponding operation. Power Button Press and hold the Power button for 3 seconds to turn on the unit.
Home/Exit Button Long press the Home/Exit button for 2 seconds get into the Home Page, including Magnifier Application, Text to Speech Application, Open Application and Settings Menu. The chosen one will be highlighted. Choose the specific icon with touchscreen gesture (or use the Joystick to choose and Speech/Enter button to confirm).
Magnification range: 1 -- 60 times (Near View) Brightness In the Magnifier Application, short press the Home/Exit button or slide up from the bottom screen to pop up the Control Bar. Tao to choose the icon below (or use the Joystick ...
Press down the Enhanced Color button to quickly switch between the nature color and the latest enhanced color. Press and hold the Enhanced Color button for 5 seconds to enter the Customized Color Page, use the tap gesture to activate/inactivate the enhanced color combination (or use the Joystick to choose and Speech/Enter button...
Use the slide gesture or turn the Zoom button to change the contrast color of background and foreground. No operation for 5 seconds or short press the Home/Exit button or Speech/Enter button ) or tap the inactive area to close. Lighting In the Magnifier Application, short press the Home/Exit Button or slide up from the bottom screen to pop up the Control Bar.
Volume The Button/Voice volume and the Text-to-Speech volume can be controlled separately. Use the slide gesture or press the Voice Up button or Voice Down button to adjust the volume. Button/Voice Volume Bar Text-to-Speech Volume Bar Image Freeze Freezing a live image can be useful for the moving objects. Further magnification as well as enhanced color change is still available in this mode.
Page 20
With Voice Label enabled, the Voice Record icon will appear after the storage. Tap and hold the Mic icon to begin recording and release to finish (or press and hold the Speech/Enter button to record and release to finish). ...
Note: The Voice Record function can be turned off in the Settings Menu. When the saved images reach at the maximum capacity (2 GB, Memory Full icon appears), you will need to delete some pictures first in Playback mode before the next successful saving. Line and Mask Press the Line/Mask button to switch among different Reading...
Horizontal mask Press and hold the Line/Mask button and slide the Joystick up/down to change the position of the masks;slide the Joystick left/right to narrow/enlarge the distance between the masks. Vertical mask Press and hold the Line/Mask button and slide the Joystick left/right to change the position of the masks;slide...
Rotate the Zoom button can quickly back to the original position of the box. Push the joystick to to any direction and press down the Zoom button can re-center the box. Short press the Zoom button again (or double tap inside the box), then the highlighted context will zoom in to the previous higher zoom level automatically Live Panning...
Toggling System (Depends on the configuration) The Switch button has different functions depending on which configuration you choose for the Clover Book. Clover Book Lite/Mate:press the Switch button to quickly get into the picture gallery.
Page 25
Clover Book Pro: long press the Switch button in near view mode to get into full page reading. Long press the Switch button in other viewing modes to quickly back to the Near View mode. Single Display When the HDMI Out port is not occupied, the device is in Single Display case.
Page 26
Flip View The distance camera can also be used for reading and handwriting. In the Distance View/Mirror View Mode, press the Home/Exit button to pop up the quick control bar. Tap the icon (or slide the Joystick to choose and Speech/Enter button to confirm) to turn around the image and the Lighting icon is available.
Page 27
Press and hold the Line/Mask button and push the Joystick to change the viewing size of two images. Tap gesture to highlight the one of the split screens (or press Line/Mask button to switch), in which operations such as magnification can be applied.
Page 28
the Joystick ). The highlighted screen can apply operations such as magnification. Micrograph Function This function is only available when the images are the same on the main screen and the external screen (Near View Mode or Distance/Mirror View Mode). ...
Full Page Reading (Optional) The device can capture the full page and you can read with the ability to magnify, change colors, and scroll around the page. Press the Home/Exit button to pop up the Quick Control Bar. Tap the icon (or long press the Switch button for 2 seconds in near view mode ) to get into the Full page Mode.
Page 30
the content of full page (up to A4 size). Current Page Application can recognize the viewing content of current zoom level. Full Page OCR There are two ways to get into the Full Page Application: 1. Long press the Speech/Enter button for 2 seconds.
Page 31
TTS Operation As soon as the recognition procedure finishes, the TTS Control Bar(default) appears at the bottom of the screen. Touch and Slide the Speech Speed Bar to adjust the reading speed. Press the Zoom button to quickly back to the original size if the content is enlarged.
Page 32
Segmentation Enabled With Segmentation Function enabled, the content will be divided into several sections automatically. Single-selection Tap the Play icon /the Pause icon (or press the Speech button ) to start/stop reading the highlighted section. When paused, tap one section you are interested in will highlight the chosen section.
Page 33
Tap the Pause icon (or press the Speech button ) to pause the reading. Long press on the specific region will start reading from that place and will be highlighted line by line. Tap Previous icon / Next icon will jump to the previous/next sentence and highlight it.
Long press on a specific word on the screen can start reading from that word. Open Application There are two choices in the Open Application. When the external SD card is not inserted into the device, only the Internal Memory icon is available.
Page 35
Long tap the Transfer icon (or long press the Enter/Speech button ) for 3 seconds, all the picture/document will be chosen and transferred to the external SD card. With Multi-seletion enabled, couple selected pictures/documents can be transferred at once by tapping the Transfer icon (or press the Freeze button ) to pop up...
Page 36
Long tap on the screen or tap the Exit icon again (or press the Home/Exit button or long press the Freeze button )to exit the multi-selection. Open (Shared) Picture When get into the Open application from the Home page, activate the Picture icon to enter the Picture gallery.
Page 37
Note: Besides the hand gesture, you can use the Joystick and press the Speech/Enter button to achieve the above operation. Tap the Exit icon (or long press the Home/Exit button to exit to the gallery. When in the gallery, select the target image which needs to be deleted, tap the Trash icon (or press the Line/Mask button...
Page 38
If the text is stored with its original picture from TTS mode, the text in the gallery can be shown as the thumb picture. Press the Zoom button can preview and functions such as Enhanced Color, Zoom and Line&Mask are available. Press the Home/Exit button can return to the gallery.
Tap the highlighted document again to read. Tap the icon to page up/down the file. Tap the icon to quickly go back to the first page or last page. Tap the Speech icon to get into TTS function. Specific TTS operation refers to the last chapter.
Page 40
Option Page Get into the Customized Color Page via “Color Mode Combination” and use the tap gesture to activate/inactivate the enhanced color combination (or use the Joystick to choose and Speech/Enter button to confirm). Voice Label provides an option of voice record when save the picture.
(or use the Joystick to choose and Speech/Enter button to confirm). Tap the Exit icon to exit the Customized Color Page (or press the Home/Exit button Factory Setting Page System Reset can help to restore to the default factory settings. Auto power off when reset is done.
HDMI Input Connect an external camera to the unit which will show the image that the camera captures (1080P resolution is required). The internal distance camera will be bypassed Hardware Reset When the unit is hung or can’t be turned off normally, press the Power and Voice Up Button and Voice Down Button...
Troubleshooting The unit does not turn on Connect to the power adapter Charge the battery Hardware Reset Black screen or White screen If the unit is sitting on a flat pure surface or there is nothing on the tray, the screen may be black or white.
Page 44
Clean the LCD screen and camera Image is out of focus Check if the auto focus is disabled move your hand back and forth over the document you are viewing to trigger the focus Tap on the screen for 2 seconds to trigger the focus manually ...
Need help?
Do you have a question about the Clover Book and is the answer not in the manual?
Questions and answers