Advertisement
Inflation
The Dinghy Tribord 5S inflates to a optimal pressure of 15 PSI
IMPORTANT : To guarantee your safety and the boat's performance, we recommend that you respect the nominal pressure: Avoid over inflation and under inflation.
the boat is inflated using suitable pumps: manual and electric pumps ITIWIT, compatible for pressure of 15PSI.
The hull has a large volume, if using manual pumps, it is recommended to have 2 people inflate it using 2 pumps.
WARNINGS
Please pay particular attention to the maximum values such as inflation and assembly, stated on the identification plate and in user instructions. Not respec-
ting these rules can affect the manoeuvrability of the boat and the safety of the crew.
We recommend you rinse your boat with fresh water and dry it before long term storage. Do not store in direct sunlight. Regularly check the integrity of the
boat and contact our after-sales-service if you have any doubt.
An unequal distribution of people on board may compromise the stability of the boat, depending on the force exerted by the wind in the sail and the position
of the crew on board. If you are unsure, seat the crew between the benches, at the bottom of the boat.
It is crucial to always consult the weather forecast before you go sailing and find out about the specifics of the area. Beaware of offshorewinds and currents.
REPAIR KIT
This kit includes : PVC sheets + 1 wrench
ATTENTION : The wrench used to rescrew the valve in the case of a leak must only be used when the BOAT is fully deflated. Never use the wrench to screw
or unscrew the valve when the BOAT is inflated, this may result in serious injury.
3. USE
p.4
Advertisement
