Panasonic FV-SCGPW1 Operating And Installation Instructions page 2

Safety Precautions
To avoid the possibility of causing injury to users or damage to properties, please follow
all explanations written below.
■ The following symbols are used to classify and describe the type of instructions.
This symbol denotes an action that must NOT be performed.
This symbol denotes an action that must be performed.
■ If NOT following the instructions or misusing the product, it may cause damage,
the levels of damage are categorized and explained as indicated below.
WARNING
CAUTION
Do not change specifications, and disassemble or remodel the product.
May cause fire, electrical shock or injury.
Provide a secure wiring connection using the specified cable so that no
external force is applied to the connector.
May cause fire.
Do not use the product near any medical equipment or automatic control
equipment.
Radio wave may interfere with the equipment and may cause incident due to malfunction.
Keep at least 15 cm away from the product if you have a cardiac pacemaker.
Radio wave may interfere with the operation of pacemaker.
Keep the product away from devices such as other wireless devices,
microwaves and the devices that use 2.4 GHz signal.
Radio wave may interfere with the equipment and may cause incident due to
malfunction. The product may not work properly depending on locations it is used.
Do not use the product in a high
humidity location such as a
bathroom.
May cause electrical shock.
Do not install the product in the
following locations:
• Where flammable gas may leak.
• Where water or oil splashes
(machine oil included).
• Where electromagnetic wave
generators are installed.
• Where organic solvents splash.
May cause fire, electrical shock or injury.
2
English
Denotes a potential hazard that may result in serious injury
or death.
Denotes a hazard that may result in minor injury or damage
to the unit or other equipment.
WARNING
(automatic doors and fire alarms, etc.)
CAUTION
Always follow these instructions
The product should be installed
firmly by a qualified person.
Faulty installation may cause
electric shock or fire.
Do not perform the following
actions:
• Pour water, or clean with water
or detergent.
• Insert fingers or sticks into the
openings.
• Hang on to the product.
May cause electrical shock or injury.
Do not damage or extend
the signal cord.
May cause electric shock or fire.