General Instructions For Gsm Tx Troubleshooting - Nokia NPM-10 Series Troubleshooting Instructions

CCS Technical Documentation
Figure 16: TX measurement point in Mjolner (N600) shielding can

General Instructions for GSM TX Troubleshooting

Apply a RF cable to the test jig's RF connector to allow the transmitted signal to act as
normal. The RF cable should be connected to measurement equipment with at least a
10 dB attenuator, or the test equipment may be damaged.
Start Phoenix-Service-Software and:
Establish a connection to the phone e.g. FBUS or MBUS.
Select File
Choose Product
Issue 1 03/2003
Nokia Corporation
Troubleshooting Instructions RF
Confidential
NPM-10
Page 23