Funkey SP-561 User Manual page 32

chord accompaniment. The following two input possibilities are automatically recognized by the
instrument.
Single Finger
In this mode, by means of a single arbitrary key in the range C3 ~ F4 #, you can specify the
chord for the corresponding chord accompaniment. Here, the pressed key sets the root of the
accompaniment chord in major. The nearest left black key can be pressed to change the chord
gender to minor.
Multi-Finger
In this mode you can specify the chord for the corresponding chord accompaniment by means
of three keys in the range of C3 ~ F4 # which define a whole chord. As long as you do not
specify a three-part chord, only the drum rhythm will sound.
9) Synchro
By pressing the Synchro button you activate the Sync-Start mode. If rhythm is selected and
chord recognition is active, the rhythm or chord accompaniment will now start automatically
when you press a key in the left keyboard area (C3 ~ F4 #).
10) Touch dynamics
Press the Dynamics button to switch the velocity dynamics active or inactive.
11) Transpose function
By pressing the trans button you enter the menu for the transpose function. Raise or lower the
pitch in semitone steps using the control buttons.
12) Metronome
Press the metronome button to activate the metronome. By pressing it several times, you can
choose between ¼, 2/4, ¾ and 4/4 time signatures. Press the Stop / Pause button to stop the
metronome.
13) Recording function
Press REC to switch to the recording mode. Press any key on the keyboard to start recording.
During recording, press the Play button to play back the recorded data. Stop playback by
pressing the Play button. To play back again, press Play again.
Pressing REC again clears the memory and returns you to the recording mode.
14) Dual Voice
Press the Dual Voice button to overlay two tones. First select one timbre with the control keys,
then press Dual Voice and now select the second timbre with the control buttons. Exit this mode
by pressing the Dual Keyboard button again.
15) Sustain
Press the Sustain button to prolong the decay of the selected sound. Press the button again to
exit this setting. Sustain does not work in Dual Voice.
13