Funkey SP-561 User Manual page 28

14) Drum Kit
Press the DrumKit button to use the keyboard as a percussion instrument. You leave this setting
by pressing the DrumKit button again.
15) Dual Keyboard
Press the Dual Keyboard button to split the keyboard in two. A bass tone is now set in the left
keyboard area. The timbre of the right keyboard area can be changed using the control keys.
Exit this mode by pressing the Dual Keyboard button again.
16) Sustain
Press the Sustain button to prolong the decay of the selected sound. Press the button again to
exit this setting.
3. Rear connections
1) Midi connection via cable
The piano can be connected to any midi-enabled program on your computer via the midi
interface.
If you do not have a midi capable software installed on your computer, you can find a free
software for Windows to test the function of your piano at
https://www.kirstein.de/produkte/00046/00046319/en-piano.zip
for download.
2) Pedal connector
Connect the supplied sustain pedal to the pedal jack on the back of your instrument
3) Charging the integrated battery
Connect the included po wer supply to the USB DC 5V connector on the back of your
instrument. The LED charging indicator signals the charging process. When the battery is fully
charged, the LED goes out.
4. Bluetooth
The Bluetooth function is automatically active when the instrument is switched on.
Bluetooth MIDI
Connect your instrument to a Bluetooth-enabled cell phone or tablet to transmit MIDI data from
the instrument to the smart device. The Bluetooth name for MIDI connection is "MIDI Piano".
Bluetooth audio
Connect your instrument to a Bluetooth-enabled cell phone or tablet to play music from your
smart device through the piano. The Bluetooth name for audio transmission is "Music Piano".
5. Sheet music / Tablet holder
Insert the supplied plastic brackets into the narrow bead on the back of the top edge of the
instrument to use them as sheet music or tablet holders.
9