Menu Operation - Boss Audio Systems 738BI User Manual

8. MENU OPERATION

23) MENU FUNCTION LIST (MENU)
Press MENU for more than 3 seconds to access the menu.
momentarily. Navigate the menu by pressing MENU momentarily to move forward to the next
option. The menu can also be navigated by using the Tuning Up or Tuning Down Button to
move to the next or previous option. Once the desired option appears in the display, adjust that
option by rotating the volume control within 5 seconds. The following options are adjusted
through this menu feature.
Pairing ( PAIR HF )
This feature is used to pairing the unit's Blue tooth system to your mobile phone or other Blue
tooth device. Under the MENU "Pairing" mode then press Audio button to start activating the
Pairing.
"PAIR HF" is special use for pairing with mobile phone with Bluetooth function, if the
pairing device is a Bluetooth Audio device, rotate the encoder to "PAIR AD" then
press Audio button to start activating the pairing with audio device.
Tips
Pls refer to BLUE TOOTH HAND FREE Operation regarding the details operation of
"PAIRING".
Re-connection/Dis-connection (RE-CON / DIS-CON )
This feature is allows to Re-connect or Dis-connect to the paired mobile phone or Blue tooth
device by manually. Under the Menu- "RE-CON"mode, Rotate the encoder to navigate thru
"RE-CON" (re-connection) and "DIS-CON"(Dis-connection). After selected the mode for
connection then press Audio button to start activating the connection mode.
Incoming call ringing volume (
The unit can preset the Ringing volume level for any incoming call. The default RINGING
VOLUME LEVEL VALUE is "20". Rotate the encoder knob to adjust from Min 00 to Max 38.
Time Set ( CLK )
The time on the clock will be set to 12:00 as the default. Program the current time by rotating
the volume control clockwise to adjust the minutes and counterclockwise to adjust the hours.
AREA (TUNER FREQUENCY SPACING)
This option allows the selection of the frequency spacing appropriate for your area. "AREA
U.S.A." is the default setting. Rotate the volume control to select the U.S.A. Latin America,
Europe or Oirt options.
Local / Distance Select
This feature is used to designate the strength of the signals at which the radio will stop during
automatic tuning. "Distance" is the default, allowing the radio to stop at a broader range of
signals. To set the unit to select only strong local stations during automatic tuning, rotate the
volume control until "Local" appears in the display.
Programmable Turn-on Volume ( P-VOL )
This option allows selection of the volume level the radio will automatically assume when first
turned on. "VOL PGM 12 " is the default setting, which will turn the radio on at the volume level
selected when the unit was last turned off.
To program a specific volume level for the radio to turn on at, rotate the volume control to select
"VOLUME LEVEL ". Within 5 seconds
Beep Tone ( BEEP )
The beep tone feature allows the selection of an audible beep tone to be heard each time a
button is pressed on the face of the radio. "BEEP TONE On" is the default display. Rotate the
volume control to select the "BEEP TONE Off" option.
BT VOL)
10
Will appear in the display