Verbatim Vi560 Manual page 7

M.2 interface connector.
b. Insert the Vi560 SATA III M.2 2280 SSD into the SATA III M.2 interface
connector. Make sure to line up the SSD screw eyelet with the motherboard
screw (exhibit A).
c. Fasten the Vi560 SSD to your motherboard using a screw (exhibit B).
6. Replace any covers or access panel(s) you opened or removed.
7. Replace the battery back into the laptop computer and power on the laptop.
8. Using your new SSD:
a. If you cloned your previous drive to the new SSD, it should be ready for you to
utilize now.
b. If you did not clone your previous drive, proceed to install operating system,
drivers, rmware, applications, and user data to your SSD as desired.
Exhibit A: Exhibit B:
4