Table of Contents
Advertisement
3. RS232
Pre-load and store RS232 commands for controlling displa y device.
6.
INSTALLATION AND WIRING
6.1. Installation
Note: Before installation, please ensure the de vice is disconnected from the power source.
Steps to install the device in a suitable location:
1. Attach the installation bracket to the device's enclosure using the screws pro vided in the
package separately. The bracket is attached to the enclosure as shown.
2. Repeat step 1 for the other side of the de v ice.
3. Repeat step 1-2 for the receiv er.
4. Attach the brackets to the surface y ou want to hold the unit against using the screws
(provided by others).
6.2. Wiring
Warnings:
• Before wiring, disconnect the power from all de vices.
• During wiring, connect and disconnect the cables gently .
Steps for device wiring:
1. Connect an HDMI source (such as PC, Blu-r a y, games console, satellite/ cable TV, media
server etc.) to HDMI IN port of this de vice.
2. Connect an HDMI display device (Such as projector) to the HDMI OUT port of this de v ice.
3. Connect audio receivers to the S/PDIF OUT port and A UDIO OUT port of this de vice.
4. Connect projector to the RS232 port for pass-through the commands to control the
projector.
5. Connect projection screen to the RELA Y1 and RELAY2 ports to control the projection
screen on/off.
6. Connect the power adapter provided. Power on all devices.
8
Advertisement
Table of Contents
