Page 1
Binary 260 Series 4K HDR In-Line Controller B-260-HDMI-CTRL INSTALLATION MANUAL Source | M (HDMI Ou...
Page 3
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this manual. Keep this manual for future reference. 1. Do not expose this apparatus to rain or moisture. Do not e xpose this equipment to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
Page 4
FCC WARNINGS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro v ide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PRODUCT OVERVIEW B-260-HDMI-CTRL is an HDMI In-line Controller , with resolutions up to 4K @60Hz (chroma sub-sampling 4:4:4 8-bit only) and HDCP 2.2. Its digital or analog audio outputs allow audio to be de-embedded from HDMI input and sent to audio distribution system, such as Amplifie. Its rotary EDID switch has 15 EDID presets and can help negotiate the HDMI handshak e in certain situations, such as an old HDMI displa y with DDC channel invalid, or DVI display with audio amplified requirement By auto-detecting input signal status, it could automatically trigger CEC commands to turn on...
DEVICE LAYOUT 5.1. B-260-HDMI-CTRL Front Panel 1. DC 12V Connect to the power adapter pro vided. 2. POWER LED On/Off: The device is powered on/ off. 3. HDMI IN Connect to an HDMI source. 4. EDID Switch for EDID Management with 15 EDID presets. 5.
3. RS232 Pre-load and store RS232 commands for controlling displa y device. INSTALLATION AND WIRING 6.1. Installation Note: Before installation, please ensure the de vice is disconnected from the power source. Steps to install the device in a suitable location: 1.
Page 9
Amplifier HDMI IN SPDIF OUT AUDIO OUT Relay Control HDMI OUT RS232 Projector Screen Projector...
EDID MANAGEMENT EDID (Extended Display Identification Data) is a data structure pr vided by a digital display to describe its capabilities to a video source. This de vice features multiple EDID presets which can be performed using the EDID rotary switch on rear panel. By default, the EDID switch is set in position 0.
RS232 CONTROL TOOL RS232 port configu ation tool is one control tool running on PC to pro-load the RS232 commands for this device to control the display. Connect a PC to the de vice via a UART-to-USB cable, running the Uart port configu ation tool to set the connection par a meters correctly before send the pro-loading commands to the de v ice.
10. WARRANTY Find details of the product’s Limited Warranty and other safety, patent, and legal resources at snapone.com/legal or request a paper copy from Customer Service at 866.424.4489 11. SUPPORT For chat and telephone, visit tech.control4.com/s/contactsupport • Email: TechSupport@SnapOne.com • Visit tech.control4.com for discussions, instructional videos, news, and more.
Page 15
Snap One, LLC (formerly known as Wirepath Home Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My Home, SnapAV, Araknis Networks, BakPak, Binary, Dragonfly, Episode, Luma, Mockupancy, Nearus, NEEO, Optiview, OvrC, Pakedge, Sense, Strong, Strong Evolve, Strong VersaBox, SunBriteDS, SunBriteTV, Triad, Truvision, Visualint, WattBox, Wirepath, and Wirepath ONE are also registered trademarks or trademarks of Snap One, LLC.