5.
DEVICE LAYOUT
5.1. B-260-HDMI-CTRL Front Panel
1. DC 12V
Connect to the power adapter pro vided.
2. POWER LED
On/Off: The device is powered on/ off.
3. HDMI IN
Connect to an HDMI source.
4. EDID
Switch for EDID Management with 15 EDID presets.
5. S/PDIF OUT
RCA coaxial port for HDMI audio de-embedded output. Connect to an audio receiv er for
S/PDIF digital audio output.
6. AUDIO OUT
3.5mm audio jack for HDMI audio de-embedded output. Connect to an audio receiv er for
stereo audio output.
5.2. B-260-HDMI-CTRL Rear Panel
1. RELAY1-2
Connect to the projector screen for Rela y control (turn on or off the screen) when the
change of input signal status is detected.
2. HDMI Out
Connect to an HDMI displa y.
1
2
3
1
4
5
2
3
7
6