Replacing The Remote Control Battery; Using An Apple Insert; Cleaning The System - Bose SoundDock Series II Owner's Manual

TAB 8 TAB 7
Replacing the remote control
battery
When the remote stops operating or its range seems
reduced, it is time to change the remote battery.
1.
Using a coin, turn the battery cover
slightly counterclockwise.
2.
Remove the used battery and
replace with a new battery (CR2032
or DL2032). Refer to page ii for
battery safety instructions. Be sure
the battery is flat side up, with the +
symbol in view.
3.
Reseat the cover and turn it
clockwise until it locks into place.
6
TAB 6 TAB 5 TAB 4 TAB 3

Using an Apple insert

The SoundDock ® Series II digital music system features a
removable universal insert. This insert can accommodate most
iPod models. For a custom fit, use your insert supplied by Apple.
To remove the universal insert, put your fingernail (as shown)
in the slot (or gently use a thin object) and pull up.

Cleaning the system

Wipe the system using a soft, dry cloth. You can also lightly
vacuum the grille.
• Do not use solvents, chemicals, or sprays.
• Do not allow liquids to spill or objects to drop into any
openings.
TAB 2 English