Advertisement
Quick Links
ASSEMBLY STEPS:
1. Install the eight All-Thread Bolts (C) into the threaded metal plates mounted on the Headboard and
Footboard posts.
2. Gently lean the Headboard against the wall where the completed Bed will be located in the room.
3. Position one end of one Bed Rail onto the All-Thread Bolts and fasten with the Spring Washers (A)
and Hex Nuts (B). Only partially tighten the Hex Nuts until the Footboard has been connected.
Repeat for other Bed Rail.
4. Position and connect the Footboard to the other end of the Bed Rails as in previous Step.
5. Carefully align the Footboard to be 'square' with the Headboard. Using the Open Wrench (D)
tighten all Hex Nuts attaching the Side Rails to the Headboard and Footboard.
Bella Vista Bedroom
Assembly Instructions
4 pcs. for 5/0
8 pcs. for 6/6
Made in China
To prevent undue stress on
any bed, always remove the
mattress and box springs
before moving bed.
Advertisement
Related Manuals for Riverside Furniture Bella Vista
Summary of Contents for Riverside Furniture Bella Vista
- Page 1 Bella Vista Bedroom Made in China Assembly Instructions 4 pcs. for 5/0 8 pcs. for 6/6 To prevent undue stress on any bed, always remove the mattress and box springs before moving bed. ASSEMBLY STEPS: 1. Install the eight All-Thread Bolts (C) into the threaded metal plates mounted on the Headboard and Footboard posts.
- Page 2 Page 2 of 4 2 pcs. 1 pc.
- Page 3 Page 3 of 4 To Remove Drawer: With the drawer fully open, the drawer slides must be released by pressing the "trigger" located in the slide either up or down, depending on which slide is being released. With both triggers pressed, gently pull the drawer until the slides release.
- Page 4 Page 4 of 4 Caution: To prevent undue stress on any bed frame, always remove the mattress and box springs before moving.