Advertisement
STEP 2 - Mounting with screws/single-gang wallplate
Installing Your Switch
IMPORTANT
Start by removing the clear plastic tab
from the back of the switch.
1. Identify where you want to mount your Wire-Free Switch (switches are
typically located 48-52" from the floor to the top of the switch).
2. Mark the location for holes to be drilled. We suggest using the
mounting holes on the switch housing as a guide. Use the level (optional)
to ensure the switch is level before drilling holes.
3. Using 7/32" bit, drill holes in wall for mounting screws.
Insert drywall anchors.
4. Secure the switch to the wall until level and flush.
5. Screw on the faceplate bracket, then snap the faceplate cover
onto the bracket.
Advertisement
