Advertisement
STEP 2 - Mounting with adhesive tape
Installing Your Switch
IMPORTANT
Start by removing the clear plastic tab
from the back of the switch.
1. Identify where you want to mount your Wire-Free Switch (switches are
typically located 48-52" from the floor to the top of the switch).
2. Prior to installation, be sure that the surface is smooth and degreased.
3. Apply adhesive tape to the middle back of the switch. Adhesive tab
should stick out from the side of the switch. This will be covered by
the wallplate and allows removeal if needed in the future.
4. Mount switch to the wall.
5. Screw on the faceplate bracket, then snap the faceplate cover
onto the bracket.
Advertisement
