Changing The Hdmi Video Resolution - Bose Lifestyle V30 Owner's Manual

English

Changing the HDMI video resolution

®
Your Lifestyle system transmits video at the highest
possible resolution to your HDTV. Occasionally, you
may want to change to a lower resolution, even though
your HDTV can display a higher resolution. For
example, if a source signal is converted by your Life-
®
style system to a much higher resolution, the result
may not be pleasing to your eye. In that case, you could
change to a lower resolution.
The video resolution can only be set when the
®
Lifestyle system is connected to an HDTV through the
HDMI OUT connector. Also, the video resolution cannot
be set lower than that of the video signal entering your
®
Lifestyle system (no down-conversion). Finally, setting
the video resolution (that your Lifestyle
transmits to the TV) for CBL-SAT, DVD, VCR, or AUX
changes the resolution for all other sources. The video
resolution you set for the HDMI output applies across
all the sources.
To change to a lower resolution, do the following:
1. On the Lifestyle
®
system
2. Move down to
3. Select a resolution, then press Exit.
Not e:
capable of displaying is labeled *default. For example, if
the highest resolution of the TV is 1080i, the menu will list
the choice as 1080i *default.
®
remote, press the Settings but-
ton and see if (Video Resolution) is in the list
of menu options. If it is, go to Step 2. Otherwise,
the ability to access this option has been disabled
in the System menu, and you must complete Steps
A through D (below) to enable it.
A. On your remote, press System to display the
system menu on the HDTV.
B. Move right to (Video), then press ENTER.
C. Move down to Video Resolution and press
ENTER.
D. Choose Adjustable, then (on the remote) press
Settings.
, then press ENTER.
The highest resolution that the connected HDTV is
O
PERATION
41