Advertisement
Dispense pump flow rate change
1.
The dispense pump flow rate can be adjusted to a slower flow rate. This may be needed in a waiting room environment
where smaller cups are provided to the user. The dispense rate can be adjusted without opening the system, by using a
sequence of motions with the sensors.
2.
To lower the dispense pump for cold water for 4 L/min to 2 L/mini. Place both hands over hot select and dispense sensors
simultaneously until audible chimes are heard, remove hands and repeat process until audible chimes are heard.
Deactivate tone
1.
Turning o the activity tone. The PW90CT purposefully makes a 'ding' noise when a sensor is activated in order to give
audible feedback to the user. In a very quiet environment this feature may be unwanted. The audible tone can be
deactivated without opening the system, by using a sequence of motions with the sensors.
2.
To deactivate the tone, hover over the "Hot Select" sensor for 1 second. Within 7 seconds, wave your hand over the
"Dispense" sensor 5 times. Once this action is completed, the activity tone should be deactivated.
Additional PW90CT
Programing Features
Advertisement
