Engineering Mode - LG MG200 Service Manual

9. ENGINEERING MODE

Engineering mode is designed to allow a service man/engineer to view and test the basic functions provided
by a handset. The key sequence for switching the engineering mode on is "2945#*#" Select. Pressing END
will switch back to non-engineering mode operation. Use Up and Down key to select a menu and press
'select' key to progress the test. Pressing 'back key will switch back to the original test menu.
[1] All auto test
[2] Baseband test
[2-1] LED
[2-1-1] BACKLIGHT ON/OFF
[2-1-2] INDICATOR LED ON/OFF
[2-2] LCD
[2-2-1] LCD AUTO
[2-2-2] LCD COLOR
[2-2-3] LCD CONTRAST
[2-2-4] MAIN LCD RGB
[2-3] CAMERA
[2-3-1] PREVIEW
[2-4] FONT
[2-4-1] FONT 8••10
[2-4-2] FONT 8••10 I
[2-4-3] FONT 8••10B
[2-4-4] FONT 8••14
[2-4-5] FONT 8••14I
[2-4-6] FONT 8••14B
[2-4-7] FONT 10••18
[2-4-8] FONT 10••19
[2-4-9] IMFONT
[2-5] ALERT
[2-5-1] VIBRATOR
[2-5-2] RING
[2-5-3] EFFECT SOUND
[2-5-4] IMELODY TEST
[2-5-5] EMS SOUND
[2-5-6] VOLUME
[2-6] SERIAL PORT
[2-6-1] MODEM
[2-7] BATTERY INFO1
[2-8] AUDIO GAIN
[2-8-1] RECEIVER
[2-8-2] EAR MIC
[2-8-3] LOUD SPEAKER
[2-8-4] HANDSFREE
[2-8-5] DEFAULT VALUE
[2-8-6] DAI TEST
[2-8-7] LOOPBACK TEST
[3] S/W VERS
[4] ENG MODE
[4-1] CELL ENVIRON
[4-2] LOCATION INFO
[4-3] LAYER1 INFO
[4-4] WORLD PHONE
[5] CALL TIMER
[6] FACTORY DEFAULT
- 115 -
9. ENGINEERING MODE