Engineering Mode (Phone Test Mode) - LG KF390 Service Manual

11. Engineering Mode (Phone Test Mode)

Enter Engineering Mode: 277634#*#
• Note: The purpose of menu is solely for the Test & Verification of post-production
check. Some test functionality may harm SIM or Phone data completely.
11.1.1 Menu Structure
[1] Version Info
1) SW Version Info
1) SW Version
2) Media Version
3) Module Version
4) HW Version
2) Factory Version
[2] Factory Reset
1)Popup Dialog
1) Yes
2) No
[3] Device Test
1) Auto All Test
2) LCD
3) LED
4) Camera
5) Font
6) Sound
7) RTC Test
8) Key Press Test
9) Secure Clock Test
0) Touch Pad Test
[4] Port Setting
1) Diag Setting
1)UART Set for Diag
2) USB Set for Diag
3) BT Set for Diag
4) NULL Port
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
11. Engineering Mode (Phone Test Mode)
2) Data Setting
1) USB Set for Data
2) BT Set for Data
3) UART Set for Data
4) NULL Port
3) USB Set for JAVA
4) Mass Storage
5) Mass Storage Remove
[5] Modem Setting
1) FA Setting
2) Network Mode
1) Network Mode (Phone Menu)
2) CS/PS Select
1) CS Network
2) PS Network
3) Combined
→ → Explained
3) Engineering Mode:
in Section 11.2
4) FCC Test
1) WCDMA FCC
1) 2100MHz
1) Set Channel
2) AGC Control
3) Tx Control
2) 1900MHz :
(Not Implemented in KF390)
1) Set Channel
2) AGC Control
3) Tx Control
3) 850MHz
1) Set Channel
2) AGC Control
3) Tx Control
- 151 -
2) GSM FCC
1) EGSM (800MHz)
1) Set Channel
2) AGC Control
3) Tx Control
2) PCS (1900MHz)
1) Set Channel
2) AGC Control
3) Tx Control
3) DCS (1800MHz)
1) Set Channel
2) AGC Control
3) Tx Control
4) GSM850
1) Set Channel
2) AGC Control
3) Tx Control
5) Band Freq
Popup List
1) Automatic
2) 3G 2100
3) 3G 850
4) 2G 1900
5) 2G 1800
6) 2G 900
7) 2G 850
6) GPRS Attach
Popup List
1) Power on
2) When needed
7) GSM Speech Ver
Popup List
1) EFR Speech Pref
2) AMR Speech Pref
LGE Internal Use Only