Folders; Viewing Live Images; Group Mode; Registering A Group - Bosch DVR4C1161 Operation Manual

DVR4C Remote Viewer | Operation Manual | Live Viewer
3. 1 .4

Folders

You can use folders and subfolders to organize your list of
DVRs. To create a folder:
1. Right click the mouse in the DVR list window and select
.
New Folder
> The New Folder screen appears.
> To create a subfolder right click on an existing folder in the
list.
2. Enter a name for the folder and click
3. Drag and drop DVRs from the list into the folders and
subfolders you have created.
3. 1 .5

Viewing live images

To see a live image, click a DVR to open it. If required, fill-
in a user name and password. If not shown, click on a
camera to view.

3.2 Group mode

Click the arrow next to the
screen and select
Group
3.2. 1

Registering a group

1. Click or move the mouse to the group list, right
click and select
Add Group
2. Enter a group name and select the cameras to include in
the group.
> The selected cameras are grouped and shown in the group
list.
> Each group is limited to sixteen cameras.
Edit group information by selecting a group. Click
select by right clicking the mouse.
Edit

3.2.2 Deleting a group

1. Select a group, then click
clicking the mouse.
2. Click to confirm.
OK

3.2.3 Viewing group images

Click the group icon to monitor images. The cameo display
mode is automatically selected according to the number of
cameras within the group.
Bosch Security Systems | Version 1. 1
OK.
box on the upper right of the
DVR
from the drop-down menu.
.
or select
Delete

3.3 Assigning cameos

A cameo is a single camera picture in a multiscreen display.
To assign a camera to a cameo:
1. Click one of the camera view icons
to select a multiscreen view.
2. Click on a DVR.
3. Click on the + beside the DVR name.
> A list of connected cameras appears.
4. Click on the cameo where you want that camera picture
to be shown.
> A border appears around the cameo.
5. Click on a camera.
> The camera picture appears in the cameo.
You can change the position of a cameo by dragging and
dropping it around the viewing area.

3.4 Camera views

To switch the display mode, click one of the camera view
icons
configuration.
> Single, Quad, 3x3, 12+1 and 4x4 multi-image display
modes are available.
> 3x3, 12+1 and 4x4 multi-image display modes are used
for viewing images from multiple DVR4Cs.
Click or press
back to the previous mode, press
> Double-click an image within any multi-image display to
see it in full-screen mode. To go back to the previous
mode, double-click again.

3.5 Sequencing

1. Set dwell time by clicking
or
2. Click the sequence icon
3. To stop the sequence mode, click
by right
> In sequence mode, the time duration can be set between 5
and 60 seconds. Default value is 5 seconds.
> In full-screen mode, cameras are sequenced; in Quad
mode, DVRs are sequenced.
to change the cameo display
for full-screen viewing. To go
Alt+Enter
or
Esc Alt+Enter
.
.
again.
EN | 7
.