Download Print this page

Cleaning & Maintenance - Motak MR4-C-S Manual

Advertisement

Cleaning & Maintenance
✓ Before cleaning, please turn off the range and the gas valve upstream.
✓ Please clean the burners and tray for crumbs and debris regularly.
✓ Clean the stainless steel surface with non-corrosive detergent suitable for stainless steel every day and
rinse it completely. (Do not spray the range directly with water - especially when hot, damage will
occur.)
✓ During cleaning, do not clean the stainless steel surface with abrasive detergent, brush or scraper etc.
The residual iron scale may cause rusting. Scrub it according to direction of grain. Do not clean the
surface with chlorine cleanser (bleach, hydrochloric acid etc.) even if these products are diluted.
✓ Do not clean the floor where the device locates with corrosive substance (e.g. KCL).
✓ Clean the dirt off the burners and baffle regularly.
✓ Do not modify the air ventilation volume needed during combustion.
✓ Do not allow the accumulation of substances containing acidic ingredient, e.g. vinegar, lemon juice,
spices, salt etc. which will damage the surface of the device.
✓ A complete cleaning every day will ensure good performance and extend the service life of the device.
Clean the device with a wet towel containing detergent, rinse it with clear water and dry it with clean
cloth. Do not clean the device with steel brush, which may cause rust.
✓ Splotch and abrasion of the stainless steel surface: Scrapes and black stain can be removed with a
plastic scouring pad such as Scotch Brite®. During cleaning, the direction should be the same as the
polishing, always rub with the grain on the stainless steel.
✓ Rusting on Cast Iron Cooking Grate: To remove the rust, remove cast iron grate and clean with a wire
brush. Wash in warm soapy water and immediately dry thoroughly. Lightly coat the cooking grate with
food grade cooking oil.
✓ To avoid rusting of the device, please make sure that the residual salt inside or outside the device is
cleared away.
✓ To avoid short-time incomplete combustion, be sure that the burner holes are not clogged.
✓ If this device will not be used for a long period of time, please turn off all gas valves including the
upstream supply valve. (Note: the standing pilots will go out.)
✓ 90% of the device is metals (stainless steel, iron, aluminum, galvanized metal sheet) which can be
recycled by an appointed treatment plant according to environmental standards of the equipment
installation countries. (No littering!)
For Warranty Service Call: 833-474-0367
10
Range Owner's Manual 20201109

Hide quick links:

Advertisement

loading