Advertisement
Available languages
Available languages
RESETTING DUAL CLUTCH SYSTEM
Press and hold the left gear shift, right gear shift, and square
button for two seconds
The RPM LEDs will all flash four times and then extinguish
to indicate that the Dual Clutch system has been reset
The button assigned to the Dual Clutch system (L3 or R3)
will revert to its normal function
USING LOGITECH G HUB
Logitech G HUB enables the following features on the G923:
• Button programming with profiles that can be linked to
games
• Adjustment of wheel settings, such as Rotation Angle and
TRUEFORCE strength
• Testing of the various buttons, wheel and pedal functions
G HUB WHEEL SETTINGS
Sensitivity
Alters the output response of the wheel to be more or less
sensitive Leaving this slider at 50% will provide a linear 1:1
output Between 51% and 100% will make the wheel increasingly
more sensitive around the centre movement of the wheel
Between 0% and 49% will make the wheel decreasingly sensitive
around the centre movement of the wheel
Operating Range
The G923 is capable of up to 900 degrees of rotation
Reducing this setting will change the point at which
the wheel will reach full steering lock This is especially useful
if you're driving a car with a smaller actual steering lock angle,
such as a Formula 1 or GT3 car
Centering Spring (for games without force feedback)
Most games that support force feedback already model
the correct return to center function of the G923 based on
the virtual car It is recommended that the Centering Spring
option be turned off for these games
Enabling the Centering Spring option will allow you to override
the game features and adjust the strength of the return
to center force using the provided slider
Torque
Only available for TRUEFORCE supported games Torque controls
the overall force feedback strength for your G923
12 ENGLISH
Advertisement
