Logitech TRUEFORCE G923 Setup Manual page 10

USING THE DUAL CLUTCH IN-GAME
Using a dual clutch system from a grid start in a race enables
you to achieve maximum traction without the need to find the
bite point of your clutch pedal - this can give you a significant
advantage at the start of a race
To use the dual clutch system in-game:
1
At race start, fully depress the clutch pedal and the button
assigned to the dual clutch function (see next section
for setting instructions)
2
Select first gear using the Gear Up Paddle and fully depress
the gas pedal
3
As soon as you get the green light for race start, immediately
release the Dual Clutch button The car should start moving
as the bite point of the clutch is engaged
4 Smoothly release your foot from the clutch pedal in order
to achieve maximum traction It's worth practicing this last
step and modifying the bite point setting several times
to find a method that works for you Once you have it
perfected, this feature can help make up several places on
the grid
Note:
Support for the dual clutch function is not possible in some
games A list of games that support the dual clutch feature
can be found at logitechG com/support/g923-ps4
SETTING UP THE DUAL CLUTCH SYSTEM
1 Press and hold the left and right gear paddle L3
and R3 buttons together for two seconds to enter
dual clutch setting mode The RPM LEDs will illuminate blue
and flash slowly:
Note:
Whilst in the Dual Clutch setting mode the RPM LEDs will not
respond to the game/SDK
10 ENGLISH