PRESIDENT RANDY III Owner's Manual page 20

2.
Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The channel blinks.
4.
Press the s or t key (3) to select the new channel to be watch.
5. Short press the MENU key (4) to validate the channel. The mode
blinks: AM, FM or FM UK (in U configuration only).
6.
Press the s or t key (3) to select the mode.
7. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
8. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Default Dual Watch channel is channel 09.
9) CODE SET
For simplicity, in this manual we will speak of CTCSS/DCS code
to indicate both a CTCSS tone and a DCS code, of GENRE to
indicate the kind of code (CTCSS, DCS or OFF = no code). TYPE
indicates whether this is a TX transmission or an RX reception and
MODE specifies the operating mode, Identical Id or different DF.
See § CTCSS/DCS page 11.
This menu allows you to configure the operating mode of the
CTCSS/DCS function and to store the CTCSS/DCS codes.
2 operating modes:
- I d means that the code used will be identical for transmission
(TX) and for reception (RX).
- DF means that the user can use one code (or OFF = no code) for
transmission (TX) and another (or OFF = no code) for reception
(RX).
OPERATING MODE
1. Long press the MENU key (4) to access the MENUS.
in the display.
2.
Press the s or t key (3) to select the
3. Briefly press the MENU key (4) to confirm. The operating mode
flashes (I d or DF).
4.
Press the s or t key (3) to select the desired operating mode.
STORING A CTCSS/DCS CODE
Depending on the operating mode used, the procedure differs:
Identical mode I d
5. A short press on the MENU key (4) makes the genre blink ("CTCSS",
"DCS" or "OFF" no genre).
20
menu.
appears
menu.