PRESIDENT RANDY III Owner's Manual page 12

2.
Press the s or t key (3) to select the menu to be set.
3. Short press the MENU key (4) to validate the selected menu. The
parameter of the menu blinks.
4.
Press the s or t key (3) to change the parameter.
5. Press the MENU key (4). A short press to validate and stay in the
MENU or a long press to validate and exit the MENU.
6. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
See § MENU SETTING page 16.
5) SCAN ~ DW
SCAN
(short press)
Short press the SCAN key (5) to activate the SCAN function. Press
the s key (3) to scan in increasing order. Press the t key (3) to
scan in decreasing order.
The scanning stops as soon as there is a busy channel. The
scanning automatically starts 3 seconds after the end of the
transmission and no key is activated during 3 s. The scan also
restarts in increasing order with the s key (3), or in decreasing
order with the t key (3).
When the SCAN function is activated, "SCAN" blinks on the
display.
In the current mode, press the PTT switch (14) to deactivate the
SCAN function. "SCAN" disappears on the display.
DW (Dual Watch)
Long press the DW key (5) to activate the DW function. Allows
to alternate between the active and a second (customizable)
channel. When the function is active, "DW" appears on the
display.
Press the PTT switch (14) to exit the DW function.
See menu DW (Dual Watch) SETTING page 19.
6) EMG ~ VOX
EMG
(short press)
Emergency channel is automatically selected when by pressing
EMG Key (6). First short press to call the first emergency customis-
able channel. Second short press to call the second emergency
customisable channel. "EMG" appears on the display when an
emergency channel is activated. Third short press to go back to
the current channel. "EMG" disappears on the display.
(long press)
12