PRESIDENT RANDY III Owner's Manual page 19

7) VOX SETTING
Three parameters allow to adjust the VOX function: Sensitivity:
/ Anti-vox level: / Vox delay time: .
1. Long press the MENU key (4) to enter the MENU.
the display.
2. Press the s or t key (3) to select the
3. Short press the MENU key (4) to validate. The current parameter
binks ( , or ).
4a. Short press again the MENU key (4) to validate the parameter to
be set. The value of the parameter blinks or...
4b. Press s or t key (3) to select the next parameter. Short press the
MENU key (4) to validate.
5.
Press the s or t key (3) to modify the value of the parameter.
6. Short press the MENU key (4) to validate. The current value of the
parameter stops blinking. The parameter is stored.
7. Repeat point 4 to 6 to adjust other parameters.
8. When all adjustments are done, press the MENU key (4). A short
press to validate and stay in the MENU or a long press to validate
and exit the MENU. If the KEY BEEP function is activated, a long
beep sounds to confirm the success of the operation (see § KEY
BEEP page 17).
9. If no key is pressed, the unit exits the MENU after 10 seconds
without saving the modifications.
Sensitivity : allows the adjustment of the microphone (original one
or optional vox) for an optimum transmission quality. Adjustable
level from 01 (high level) to 09 (low level). Default value: 02.
Anti-Vox : allows disabling the transmission generated by the
-
surrounding noise. The level is adjustable. OF (according the
squelch level) and from 00 (without anti-vox) to 09 (low level).
Default value: OF.
Delay time : allows avoiding the sudden cut of the transmission
-
by adding a delay at the end of speaking. The level is adjustable
from 01 (short delay) to 09 (long delay). Default value: 01.
VOX SETTING doesn't activate the VOX function.
8) DW (Dual Watch) SETTING
This function allows to customise the second channel scanned
by the DUAL WATCH function.
1. Long press the MENU key (4) to enter the MENU.
the display.
19
appears on
menu.
appears on