If this is the first printer configured, you must also use the lpsched
command prior to the accept command.
As an alternative, you may use Printer Manager in the Admintool
utility under OpenWindows. Select Edit, Add, and Add Access to
Remote Printer. Then enter the Print/Fax server name in the format
prnservername!\prnserverservice as described above.
Make sure that the printer server OS is set to BSD (the default
setting), and click Add.
Note that we recommend that you use the /etc/hosts file for the
printer name rather than NIS or other name services. Also note that
due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier
releases, you may experience problems printing very long print jobs.
If this is the case, a workaround is to use the raw TCP port software
as described later in this chapter.
SCO UNIX Configuration
To configure a printer in version Version 5.x of SCO Unix, use the
Select Printers and then Print Manager.
On the menu select Printer and then Add Remote followed by
Enter the IP address of the Print/Fax server, and type in the
name of the printer that will be used to spool to.
Deselect Use External remote Printing Protocol...
To eject the printed page, add the command rp=lpaf to the
1 - 10 UNIX PRINTING