Creating A Network Print Server (Nds Queue Server) Using Bradmin Professional Utility - Brother MFC-822 Network User's Manual

Creating a Network Print Server (NDS Queue
Server) using BRAdmin Professional utility
1
Make sure that you logged in as ADMIN in NDS mode.
2
Start BRAdmin Professional utility.
3
One or more Print/Fax servers will appear in the list (the default
node names are BRN_xxxxxx, where xxxxxx is the last six
digits of the Ethernet address (MAC address)).
You can find the node name and MAC address by printing
out the printer configuration page. For information on how to
print the configuration page on your machine, see Resetting
the Print/Fax Sever back to factory settings (Test Switch) on
page 13-4.
4
Select the printer that you wish to configure and double click it.
You will be asked for a password. The default password is
access.
5
Select the NetWare tab.
a
If it is not already selected, select Queue Server as the
operating mode.
b
Select the correct NDS tree and NDS context (you can
manually enter this information, or by clicking on the down
arrow by the side of NDS tree and the Change button by the
side of NDS Context, you can let BRAdmin Professional utility
display your choices automatically). Once you have specified
this information, click on the Change NDS queues button.
c
In the NetWare Print Queues screen select the appropriate
TREE and Context and then click the New Queue button.
d
Enter the queue name and specify the volume name. If you
do not know the volume name, select the Browse button to
browse the NetWare volumes. When the information is
entered correctly, select the OK button.
6 - 8 NOVELL NETWARE PRINTING