Tcp/Ip Configuration; Assigning Tcp/Ip Information; Overview - Brother MFC-822 Network User's Manual

11

TCP/IP Configuration

11

Assigning TCP/IP Information

Overview

The TCP/IP protocol requires that each device on the network have
it's own unique IP address. Use the following information to learn
about IP address configuration.
The Automatic Private IP Addressing (APIPA) protocol automatically
assigns an IP address from the range: 169.254.1.0 to
169.254.254.255. If the APIPA protocol is disabled, the default IP
address of a Brother print server is 192.0.0.192. However, you can
easily change this IP address number to match with the IP address
details of your network. This can be done in any of the following
ways:
From your machine's control panel settings.
BRAdmin Professional utility (for Windows
and Windows NT
DHCP, APIPA, Reverse ARP (rarp) or BOOTP.
The ARP command.
HTTP (Web browser).
Other SNMP based management utility.
Web BRAdmin software
These configuration methods are described in the following paragraphs.
The IP address you assign to the Print/Fax server must be on
the same logical network as your host computers. If it is not,
you must properly configure the subnet mask and the router
(gateway).
®
4.0 using the IPX/SPX or TCP/IP protocols).
TCP/IP CONFIGURATION 11 - 1
® /
95/98/Me 2000/XP