Installation; Operating Voltage; Preparing The Unit; Preparing The Mount - Bosch KBE-335V28-20 Instruction Manual

16 en | Installation
4

Installation

WARNING! This installation should be made by a qualified
!
service person and conform to all local codes.
4.1

Operating Voltage

All Recommended operating voltage is 24 VAC, 60 Hz.
4.2

Preparing the Unit

Remove the mount and the housing assembly from the carton.
4.3

Preparing the Mount

Prepare and secure the mount to the wall or mounting surface
as described in the LTC 9215/00 Installation Manual included in
the Instruction Booklet Packet.
4.4

Housing

Feed the cabling from the housing foot through the mount.
Attach the housing to the mount using the two (2) 1/4-20
screws and washers provided in the hardware kit. For
additional information, see the LTC 9215/00 Mount Installation
Manual and UHO-HBGS-10 Series Housing Installation Manual.
4.5

Line Power and Video Signal Connection

The external video coax cable is equipped with a female BNC
connector for transmission of video. Route and connect video
cable to the BNC connector. The external power cable is
provided to allow for necessary stripping/preparation by the
installer. For additional information, see the Installation
Manuals included in the Instruction Booklet Packet.
Color
Green
White
Black
F01U078718 | 2.0 | 2008.01
Connection
Ground
24 V
24 V
Instruction Manual
KBE and KBN Series
Bosch Security Systems, Inc.