Install The Faucet - Kohler K-R77748 Installation And Care Manual

Shank
Gasket

1. Install the Faucet

NOTE: Handle orientation is designed to be on the right.
Install the gasket to the faucet with the foam side down.
For three-hole sinks: Place the escutcheon and undercover over
the faucet holes. Insert the faucet through the escutcheon and
mounting surface with the handle on the right.
For single-hole sinks: Insert the faucet through the mounting
surface with the handle on the right.
For thin gauge stainless steel sinks, consider installing a 1/2" (13
mm) plywood support (not supplied) between the washer and
the sink.
Slide the washer and ring over the hoses and wires and up to the
shank.
Thread the ring onto the shank until the washer contacts the
underside of the sink.
Make sure that the faucet is positioned correctly.
Securely tighten the screws.
Kohler Co.
Escutcheon For
Three-Hole Sinks
Undercover
Washer
Ring
Plywood
(Optional)
5 1320925-2-C